- Marine Paint
- Pool Paint
- Floor Epoxies
- Wood Finishes
- Industrial Coatings
- Residential Finishes
- Truck & Equipment Finishes
Large or small blisters, possibly only in topcoats of the system.
Generally only local loss of adhesion of paint system.
Application over localised contamination (e.g. grease, oil, resin) Humidity or gas vapour formation from the substrate Solvent could be trapped between coats of the paint system if the primer or mid coat has not been allowed to dry fully. Incorrect coating system, e.g. quick drying top coat, at which the contained organic solvent causes blisters. Solution
Coating layers that are not sound should be removed. After the right pre-treatment against moisture penetration, a new system should be applied. Touch up bare spots with primer and finish with finish topcoat.