iPaint

POOL GUARD EHB EPOXY HIGH BUILD

THE NEW SCIENCE OF EPOXY COATINGS

FOR CONCRETE, FIBERGLASS, AS WELL AS SPAS

SCROLL DOWN FOR COLOR CHOICES

RATED #1 by over 10 magazines, including Pool & Spa Life, Luxury Pool Design, Outdoor Living Features, AG Custom Pool Magazines.



Our top selling 2-part epoxy pool paint, Epoxy High Build! Provides a durable "ceramic-like" finish that lasts up to 8 years... and inhibits algae growth. This is your economical alternative to replastering your pool. It’s also great for sealing hairline cracks. Resists many common pool stains. One gallon covers approximately 250 sq. ft. For best results pool should use 2 coats, no primer required. Label includes detailed painting instructions.

Thinner with Xylene (buy locally. Use for clean up/thinning: thinning not to exceed 10% per gallon of epoxy paint.

How much paint do I need? Use this quick formula to calculate how much paint you'll need for your pool.

To figure out the amount of paint required: Length x Width x 1.7 = square footage x 2 (2 coats) Divided by 500 (coverage per 2 gallon kit) = kits needed (remember that the product is sold in a 2 gallon kit)

Your pool is getting attacked by chlorine, shock, UV sunrays, heat, cold, sun tan oils, algae, slime, dirt and people - its time to even the score. Pool Guard EHB - Epoxy High Build - is our 2-part epoxy high build coating that will a hard tile finish, and is designed to give a perfect application on an imperfect surface. 1:1 mix ratio gives a heavy duty application, and UV stabilizers and silicone act like a "sunblock" giving extended protection against chalkiing algae and fade.

Coverage is about 500 sq. ft./ per 2 gallon kit per coat. 2 coats are recommended for proper application. - No Primer Needed - Self Priming Paint

Proper Surface Preparation is important - Wash down with TSP solution (TSP powder into a 5 gallon bucket with water)using a scrub brush. Then take 1 gallon of muriatic acid & put into a 5 gallon bucket - fill with 4 gallons of water. Scrub down the pool with this acid solution. Then rinse with the TSP solution, and let the pool dry. Then paint with 1 coat, overnight dry, 2nd coat, wait 5 days to refill. Add 1 extra day for every day of rain. Enjoy!