iPaint

Pool Guard Epoxy Pool Paint

POOL GUARD EPOXY POOL PAINT

THE NEW SCIENCE OF EPOXY COATINGS

FOR CONCRETE & FIBERGLASS POOLS - ALSO FOR SPAS

RATED #1 by over 10 magazines, including Pool & Spa Life, Luxury Pool Design, Outdoor Living Features, AG Custom Pool Magazines.

Our commercial grade 2-part Epoxy pool paint! Pool Guard is our 2-part epoxy pool coating designed for maximum protection. Built on decades of experience. Heavy duty mix ratio of 1:1 is higher than our competitors lower mix ratios. Gives a tile finish that is easy to clean, durable against automatic cleaning machines, and gives great protection against chalking, algae & fade. Step up today and use the product that professionals trust!

Coverage is about 500-600 sq. ft. per 2 gallon kit per coat. 2 coats are recommended for proper application - No Primer Needed - Self Priming Paint

To figure out the amount of paint required: Length x Width x 1.7 = square footage x 2 (2 coats) Divided by 500 = kits needed (remember that the product is sold in a 2 gallon kit)

Proper Surface Preparation is important - Wash down with TSP solution (TSP powder into a 5 gallon bucket with water)using a scrub brush. Then take 1 gallon of muriatic acid & put into a 5 gallon bucket - fill with 4 gallons of water. Scrub down the pool with this acid solution. Then rinse with the TSP solution, and let the pool dry. Then paint with 1 coat, overnight dry, 2nd coat, wait 5 days to refill. Add 1 extra day for every day of rain. Enjoy!