Government Spec Coatings
Why Buy From iPaint.us?
- 55 Years in Business
- Buy DIRECT from Manufacturer and Save
- Highest Quality Products
- Written Warranty - BEST in the industry
- Free Shipping on orders over $99
- Most Products available in over 100 Color Choices
- Many Products in Stock for IMMEDIATE Delivery
- No Hassle Returns and No Restocking Fees*
- Customers Love our Products and Service
We carry a complete line of mil-spec coatings that we sell direct to the general public. These are the same products that are sold to the military, industrial & commercial applications. All coatings are available in 100 colors, any shine, size or base. All products are in stock available for immediate delivery, save 25%, & all orders over $200 qualify for free shipping!
Decorative Flakes - Pre-Mixed Colors
$17.42 $21.77
- Super-Fleck Chips are machine ground acrylic chips used as part of a decorative floor coating system. An optional element that improves the appearance and texture of the surface while adding a measure of safety by improving slip resistance. The effect is a terrazzo-like appearance, which can be customized to meet the individual needs of the user. Disperse chips in light, medium, heavy or full coverage. Chips are UV resistant, colorfast, nontoxic and economical to use. Easy to use; just broadcast them across the still wet surface of the base coat. Clear coat is used to seal them in protecting both the chips and the base coat color. The result is a seamless floor that is both decorative and slip resistant. Chips are available in a wide variety of colors and sizes. Custom colors and color matching services are available by special order. Available in 1 LB, 3 LB, 10 LB and 55 LB quantities. Most surfaces receive medium dispersion, with approximately 1 LB covering about 100-150 square feet. For full dispersion figure approximately 7-10 LBS per 100 square feet. Chip color selection is made part of the check-out process while ordering.
SAFETY INFORMATION REQUEST FORM FAQ -
- Chips improve the appearance and texture of the surface.
- May be use in light, medium or full dispersion to create a customized surface.
- Chips improve slip resistance and safety.
- Anyone can do it without special training.
- Available in a wide variety of colors and sizes.
-
INTENDED USE: Shredded acrylic chips used to decorate and add non-slip texture to a liquid applied coating product.
SURFACES: Commercial, industrial or consumer floors.
SUBSTRATES: Wood, concrete, fiberglass, all metals and synthetic materials.
USES: Restaurants, retail spaces, commercial kitchens, basements, hospitals, laboratories, manufacturing areas, bathrooms and in retail venues. Widely used with epoxy garage floor coatings.
APPLICATION: Broadcast chips across the still wet surface of the base coat so they stick. Over coat with clear coating to seal and tie it all together.
TS-100 Silicone Epoxy CLEAR
$48.46 $60.59
- Silicone Epoxy is a unique resin blend that produces extraordinary results in a wide variety of applications. Silicone combined with epoxy produces a finish that is both hard and flexible at the same time. The self leveling finish is remarkably glossy and smooth. Offers unequaled performance where standing water, grease, oil or intense UV are regularly present. Offers a high level of adhesion with good flexibility, hardness, chemical resistance and resistance to high heat. Offers remarkable color and gloss retention. Grinding or blasting not typically required on concrete with the use of TS-695 Etching Cleaner or Muriatic acid. Covers up to 400 square feet per gallon. Apply two or more coats for best results. Note: Product formerly named 1-Part Epoxy.
SAFETY INFORMATION REQUEST FORM PRODUCT DATA SHEET APPLICATION INSTRUCTIONS CONCRETE FLOOR APPLICATION METAL ROOF APPLICATION TUB, SINK, TILE COUNTERTOP APPLICATION -
- Suitable for commercial-industrial or residential use.
- Low VOC low odor product.
- Produces a hard yet flexible finish.
- Provides a high level of chemical resistance.
- Waterproof long-term.
- Provides unequaled UV resistance, colorfastness and gloss retention.
- Withstands heat to 400F.
- Resists cracking, peeling and chipping.
- Self-leveling finish.
- 20 year guarantee.
-
INTENDED USE: Finish coating for floors. Interior / exterior use.
SURFACES: Concrete, tile, masonry, plaster, wood, fiberglass, synthetic materials and all metals.
USES: Showers, kitchens, bathrooms, laundry rooms, basements, epoxy garage floors and most concrete floor paint applications. Approved for food service.
strong>PRIMER: Concrete; self priming in to or moe coats. wood, linoleum & fiberglass TS-664 Etching Primer.
THINNER: TS-101 Thinner.
APPLICATION: Brush, roll or spray.
TS-664 Etching Primer
$38.77 $48.46
-
Etching Primer is a phenolic modified alkyd primer coating that produces a sound base coat for all floor paint and coating products. An exceptionally high quality product that conforms to government specification number TT-P-664 C, D. Fast drying; it is dry enough to be over-coated in just two hours! Choose it for its speed, ease of application, tenacious (acid etching) bond and long term durability if provides. Adheres to virtually any surface. Guaranteed to be lacquer proof (won’t lift due to compatibility issues). One gallon covers up to 300 square feet. See Product Data Sheet for further details.
NOTE: This primer is porous, intended to draw the top coat into it creating an unbreakable bond. Care should be taken to be sure it does not draw in unwanted moisture at time of application.
SAFETY INFORMATION REQUEST FORM PRODUCT DATA SHEET -
- Use it on most any surface.
- Produces an exceptionally tenacious etching bond.
- Fast drying.
- Recoatable in only two hours.
- Sandable in two hours.
- High build.
- Will fill and seal small cracks and voids.
- Withstands heat to 350F.
- Resists cracking, peeling and chipping.
-
INTENDED USE: A high adhesion primer coating for floor coating products. Intended for use on hard to adhere to surfaces. Industrial commercial and residential use.
SURFACES: Concrete, glazed tile, VCT tile, linoleum, masonry, metal, synthetic materials and wood.
USES: Hard to adhere to surfaces. Commercial and industrial areas, kitchens, food service areas, bathrooms and laundry rooms.
THINNER: TS-605 Thinner.
APPLICATION: Most applications are by roller coat but it is sprayable.
TS-66 Supreme Urethane CLEAR
$73.69 $92.12
- Supreme Urethane is our most durable product. A super-duty two-component aliphatic acrylic polyurethane finish coating durable enough for the harshest environment and high abuse areas. This recent reformulation of TS-2 Hard-Shell Urethane offers lower VOC, twice the solid content resulting in higher build and increased long-term durability. Offers unequalled performance in a wide variety of categories including adhesion, hardness, chemical resistance, resistance to high heat, flexibity, color and gloss retention. Intended for use where heavy traffic, strong chemicals, high heat, spilled fuel, acids, alkalis, solvents, saltwater, high impacts and corrosion are present. Will not pick up to hot tires. Grinding or blasting not typically required with the use of TS-695 Etching Cleaner or Muriatic acid. Covers up to 300 square feet per gallon.
SAFETY INFORMATION REQUEST FORM PRODUCT DATA SHEET APPLICATION INSTRUCTIONS -
- A recently updated government spec product suitable for commercial-industrial or residential use.
- Features lower VOC and higher solid content for increased build.
- Provides unequaled resistance to traffic and abuse.
- Finish is waterproof long-term.
- Excellent combination of flexibility and hardness.
- Outstanding UV resistance.
- Colorfast gloss retentive.
- Withstands heat to 500F.
- Self leveling finish.
- 4-6 hour pot life once mixed.
-
INTENDED USE: A super-duty finish coating for industrial, manufacturing and residential interior / exterior applications.
SURFACES: Concrete, tile, masonry, plaster, wood, fiberglass, synthetic materials and all metals.
USES: Commercial use, hangars, bathrooms, commercial kitchens, parking garages, drive through areas, concrete sealer and garage floor paint. Approved for food service.
PRIMER: Concrete TS-6390, glazed tile linoleum & fiberglass TS-664, wood, none required.
THINNER: TS-605 Thinner.
APPLICATION: Brush, roll or spray.
TS-100 Silicone Epoxy
$48.46 $60.59
- Silicone Epoxy is a unique resin blend that produces extraordinary results in a wide variety of applications. Silicone combined with epoxy produces a finish that is both hard and flexible at the same time. The self leveling finish is remarkably glossy and smooth. Offers unequaled performance where standing water, grease, oil or intense UV are regularly present. Offers a high level of adhesion with good flexibility, hardness, chemical resistance and resistance to high heat. Offers remarkable color and gloss retention. Grinding or blasting not typically required on concrete with the use of TS-695 Etching Cleaner or Muriatic acid. Covers up to 400 square feet per gallon. Apply two or more coats for best results. Note: Product formerly named 1-Part Epoxy.
SAFETY INFORMATION REQUEST FORM PRODUCT DATA SHEET APPLICATION INSTRUCTIONS CONCRETE FLOOR APPLICATION METAL ROOF APPLICATION TUB, SINK, TILE COUNTERTOP APPLICATION -
- Suitable for commercial-industrial or residential use.
- Low VOC low odor product.
- Produces a hard yet flexible finish.
- Provides a high level of chemical resistance.
- Waterproof long-term.
- Provides unequaled UV resistance, colorfastness and gloss retention.
- Withstands heat to 400F.
- Resists cracking, peeling and chipping.
- Self-leveling finish.
- 20 year guarantee.
-
INTENDED USE: Finish coating for floors. Interior / exterior use.
SURFACES: Concrete, tile, masonry, plaster, wood, fiberglass, synthetic materials and all metals.
USES: Showers, kitchens, bathrooms, laundry rooms, basements, epoxy garage floors and most concrete floor paint applications. Approved for food service.
PRIMER: Concrete; self priming in to or moe coats. wood, linoleum & fiberglass TS-664 Etching Primer.
THINNER: TS-101 Thinner.
APPLICATION: Brush, roll or spray.
TS-66 Supreme Urethane
$73.69 $92.12
- Supreme Urethane is our most durable product. A super-duty two-component aliphatic acrylic polyurethane finish coating durable enough for the harshest environment and high abuse areas. This recent reformulation of TS-2 Hard-Shell Urethane offers lower VOC, twice the solid content resulting in higher build and increased long-term durability. Offers unequalled performance in a wide variety of categories including adhesion, hardness, chemical resistance, resistance to high heat, flexibity, color and gloss retention. Intended for use where heavy traffic, strong chemicals, high heat, spilled fuel, acids, alkalis, solvents, saltwater, high impacts and corrosion are present. Will not pick up to hot tires. Grinding or blasting not typically required with the use of TS-695 Etching Cleaner or Muriatic acid. Covers up to 300 square feet per gallon.
SAFETY INFORMATION REQUEST FORM PRODUCT DATA SHEET APPLICATION INSTRUCTIONS -
- A recently updated government spec product suitable for commercial-industrial or residential use.
- Features lower VOC and higher solid content for increased build.
- Provides unequaled resistance to traffic and abuse.
- Finish is waterproof long-term.
- Excellent combination of flexibility and hardness.
- Outstanding UV resistance.
- Colorfast gloss retentive.
- Withstands heat to 500F.
- Self leveling finish.
- 4-6 hour pot life once mixed.
-
INTENDED USE: A super-duty finish coating for industrial, manufacturing and residential interior / exterior applications.
SURFACES: Concrete, tile, masonry, plaster, wood, fiberglass, synthetic materials and all metals.
USES: Commercial use, hangars, bathrooms, commercial kitchens, parking garages, drive through areas, concrete sealer and garage floor paint. Approved for food service.
PRIMER: Concrete TS-6390, glazed tile linoleum & fiberglass TS-664, wood, none required.
THINNER: TS-605 Thinner.
APPLICATION: Brush, roll or spray.
TS-107 Court-Coat
$74.66 $93.33
- Court-Coat makes creating a durable athletic area a slam-dunk! It is a no-mix acrylic latex fortified with epoxy to improve long term durability and performance. It is acceptable for use on all exterior or interior sports court surfaces including wood, concrete, macadam, all-weather asphalt and bituminous-based composition surfaces. It can be used on most any hard surface where a skid-resistant finish is desired and for pedestrian safety, such as stone, brick, unglazed tile, cement tile, concrete block, slate and primed metal. Choose one of our three optional non-skid additives (TS-630, TS-631, TS-632) to produce the exact texture you are looking for. Low odor, low VOC. Available in 100 colors. One gallon covers 250 square feet. Two coats are required.
SAFETY INFORMATION REQUEST FORM PRODUCT DATA SHEET -
- An acrylic base fortified with epoxy for higher durability.
- Choose from one of three optional non-slip additives.
- Acceptable for use on a wide variety of surfaces.
- Utilizes breathable technology reducing the likelihood of blistering or peeling.
- No-mix formula makes it easy to apply.
-
INTENDED USE: Semi-professional and amateur athletic court finish coating.
SURFACES: Concrete, wood and asphalt.
USES: Basketball, tennis, racket ball, volleyball and multisport courts. Also used for line striping in warehouses, walkways and on curbs.
THINNER: Water.
APPLICATION: Brush, roll or spray. Not for use over uncured wood, soft tar or unstable surfaces.
TS-200 Mono-Epoxy
$120.79 $143.80
- Mono-Epoxy rewrites the book on epoxy itself. A new generation alkyd epoxy-ester resin blend that eliminates the need for mixing multiple components making it easier to use. It can be used in hot and cold climates (-40F – 350F). Has a 10 year guaranty in swimming pools (see it at www.lifeguardpaint.com), which is a testimony to its durability. Its exceptionally high level of performance and ease of application combine to make it a compelling choice. Self-priming on porous materials, use recommended primer on non-porous materials. Grinding or blasting not typically required with the use of TS-695 Etching Cleaner or Muriatic acid. Covers up to 300 square feet per gallon. A minimum of two coats is required.
SAFETY INFORMATION REQUEST FORM PRODUCT DATA SHEET APPLICATION INSTRUCTIONS -
- Easy to use no mix formula.
- Commercial industrial quality product.
- Will not lift to hot tires.
- Long term waterproof finish.
- Good chemical resistance.
- Self-priming on concrete and porous tile in two or more coats.
- Resists fading and weathering.
- Resists cracking, peeling and chipping.
- Self levels.
- Low odor.
- Nontoxic finish.
- 20 year guaranty.
-
INTENDED USE: Commercial, industrial, manufacturing and residential interior / exterior. Epoxy floor paint.
SURFACES: Concrete, tile, masonry, fiberglass and metal.
USES: Commercial use, garage floors, basements, retail spaces, kitchens, laundry rooms, patios, porches, docks, ramps, walkways. Meets most concrete floor coatings requirements.
THINNER: TS-101 Leveling Thinner.
APPLICATION: Brush, roll or spray.
TS-101 Leveling Thinner
$20.33 $25.41
- Leveling Thinner is a proprietary blend of solvents that improves the viscosity leveling properties and dry and cure times of paint and coating products. Enhances the application of paint. Includes effective conditioning and drying agents. Cleans spills and tools after application. Use only where recommended for best results.
SAFETY INFORMATION REQUEST FORM -
- Improves the viscosity and leveling properties of paint and coating products.
- Use to clean up tools and spills.
- Improves dry and cure times.
-
INTENDED USE: Use Leveling Thinner to thin and condition paint and coating products where recommended.
CLEAN UP: Use to clean up tools and spills.
RECOMMENDATIONS: Use with TS-100, TS-188, TS-200 & TS-780.
TS-160 Accelerator / Hardener
$15.48 $19.35
- Accelerator/Hardener is an optional ‘pour-in additive’ for floor paint and coating products. Use it to increase the hardness, corrosion resistance, scuff resistance, and chemical resistance of paint. Accelerates the dry and cure time of paint. Improves resistance to hot tire pick-up when used with concrete floor coatings. Use it in applications where dry and cure times are limited. Highly concentrated for easy use. Three ounce container treats 1 quart, 1/2 pint treats 1 gallon, quart treats 5 gallons. Reduce dosage by 50% when used with TS-100 Silicone Epoxy Clear when applied to wood. Pot-life is approximately 2-4 hours. Color: Clear. Clean up with xylol.
SAFETY INFORMATION REQUEST FORM -
- Improves the dry and cure times of concrete coatings.
- Improves resistance to hot tire pick up.
- Improves chemical resistance.
- Concentrated pour in product.
- Extremely effective.
-
INTENDED USE: A pour in additive for use with concrete floor coatings that accelerates and hardens concrete coatings and paint products.
RECOMMENDATIONS: Use with TS-100 Silicone Epoxy or TS-200 Mono-Epoxy. Acceptable for use on concrete, tile, masonry and wooden floor surfaces.
TS-605 Fast-Dry Synthetic Thinner
$15.83 $19.82
- Fast-Dry Synthetic Thinner is a solvent that improves the viscosity leveling properties and dry and cure times of paint and coating products. Enhances the application of paint. Includes effective conditioning and drying agents. Excellent for cleaning tools and spills. Use only where recommended for best results.
SAFETY INFORMATION REQUEST FORM -
- Improves dry and cure times.
- Improves the viscosity and leveling properties of paint and coating products.
- Enhances the penetration of paint and primer.
- A strong and effective cleaning agent.
-
INTENDED USE: Use to thin and condition paint and coating products where recommended.
CLEAN UP: Use to clean up tools and spills.
RECOMMENDATIONS: Use with TS-66, TS-222, TS-664, TS-4985, TS-6390 & TS-6433.
TS-222 Floor-Grip - Gallon
$96.98 $121.22
-
Get A Grip!
Floor-Grip is something you won’t find anywhere else! It’s an exceptionally tough non skid floor coating that features three different sizes of aggregate added to a durable industrial-marine urethane. It produces an attractive finish sure to get attention.
Floor-Grip produces a rock-hard finish that really lasts. It creates a beautiful decorative non slip floor surface unlike anything you have seen before. Major hotel chains, public pools, and businesses love it because it improves safety, lowers liability and produces a very attractive finish that is tough enough to meet the demands of high traffic and easy enough to walk on in your bare feet.
Floor-Grip is excellent for use on decks, steps, gangways, ramps, in dining areas, kitchen areas, walk in freezers, pool areas and public bathrooms. It is an effective treatment for high traffic areas subject to slips and falls. It produces an attractive finish that adds texture and color. It is resistant to color fade, abrasion and the effects of ponding water. It is considerably harder, more durable and longer lasting than typical non slip floor paint. It adheres to most any surface including concrete, asphalt, and masonry while providing a durable non-skid surface that has superior resistance to abrasion, marring, chipping and cracking.
Easy application, brush or roll it on depending on surface and specific application requirements. Covers 250 square feet per gallon. Mix component A with component B at a 7:1 mix ratio, blend thoroughly and let sit 15 min before applying. Apply 2 coats for best results. Available in 100+ colors.
- Contains three different sizes of aggregates pre-mixed.
- Dual stage formula creates unmatchable weather resistance.
- Produces a rock hard finish.
- Acceptable for interior and exterior applications.
- Will not pick up due to hot tires.
- Provides good resistance to chemicals.
- Acceptable for use in marine environments.
- Resists cracking and peeling.
- Available in 100 colors.
SAFETY INFORMATION REQUEST FORM -
PHYSICAL CHARACTERISTICS:
VISCOSITY: 125 k.u.
TACK FREE: 2 hours
DRY HARD: 8 hours
TIME TO RECOAT: 8 hours
WEIGHT SOLIDS: 79-82%
VOLUME SOLIDS: 59-62%
WEIGHT PER GALLON: 14 lbs. per gal.
V.O.C.: 350 grams per liter
FLASH POINT: 80 degrees F.
PACKAGING: 1 or 5 gallon containers
BATCH: Stock
PRACTICAL COVERAGE: 250 square feet per gallon.
SURFACE PREPARATION: Clean all surfaces of oil, dirt, grease, corrosion and any existing paint that lacks good adhesion. Temperature must be a minimum of 50 degrees F. to apply FLOOR-GRIP. Steel, aluminum and masonry: Should be etched with TS-695 Etching Cleaner. For optimum adhesion over aluminum: Apply fog coat of TS-117 Pre-wash Primer (MIL-P-15328 Zinc Chromate Wash Primer). For steel, fiberglass, wood, concrete, tile: Apply TS-664D Etching Primer or TS-6390 Ever-Last Epoxy Primer.
APPLICATION: Stir FLOOR-GRIP thoroughly before applying. Apply by brush or roller at a spreading rate of 250 square feet per gallon.
THINNING: Thinning is not recommended. If absolutely necessary use TS 605 Synthetic Thinner.
CLEAN-UP: Equipment and tools may be cleaned with TS 605 Synthetic Thinner.
LIMITED WARRANTY. To the best of our knowledge, the technical data presented above is true and accurate at the date of issuance and subject to change without prior notice. TSC guarantees its products to conform to its standards of quality control. Liability is limited to replacement of product. No other warranty or guarantee of any kind is made by TSC, implied or otherwise.
-
COLOR(S): Unlimited Range of Colors.
PRODUCT TYPE: Acrylic Urethane Aggregate Coating.
DESCRIPTION: A non-slip, non-skid urethane aggregate coating for steel, aluminum and masonry surfaces. It contains a special aggregate combination which withstands rough weather conditions and daily wear and tear. Acceptable for marine and harsh industrial and commercial environments.
Intended Use: For use on steel, aluminum, concrete, tile, wood and masonry surfaces: Decks, porches, walkways, ramps, steps, boat decks, bridgeways and numerous other marine / industrial applications.
TS-333 Floor-Grip II - Gallon
$96.98 $121.22
-
Non-skid Made Easier!
Floor-Grip II (TS-333) is the result of a whole bunch of customer feed-back. It’s every- thing you asked for; safety, durability and good looks in a VOC compliant, low odor direct to metal or concrete format. It produces a beautifully textured non skid finish that really lasts. Like original Floor-Grip we’ve added three different sizes of aggregate to a tough industrial/marine modified alkyd base for lasting durability. It produces an attractive high build finish that adds sure footing in a wide variety of applications.
Floor-Grip II is tough enough for high traffic commercial areas and attractive enough to be used in front of Las Vegas Destination Hotel Casinos. Businesses and home owners love it because it improves safety, lowers liability and produces an attractive finish that is tough enough to meet the demands of high traffic and easy enough to walk on in bare feet.
The easy to use no-mix formula is acceptable for use on decks, steps, gangways, ramps, in dining areas, kitchen areas, swimming pool areas or in public bathrooms. It is resistant to color fade, abrasion and the effects of ponding water. It will fill and seal small cracks. It is considerably harder, more durable and longer lasting than typical non slip floor paint. It adheres to most any surface including concrete, asphalt, ferrous and non-ferrous metals and masonry while providing a durable non-skid surface that has superior resistance to abrasion, marring, chipping and cracking. Covers 250 square feet per gallon. Cleans up with water. VOC compliant. Available in 100 colors.
- Acceptable for use in commercial applications.
- Low odor, VOC compliant formula.
- No-Mix formula
- Acceptable for use on wood.
- Impact and scuff resistant finish.
- Resists cracking and peeling.
- Provides superior adhesion.
- Easy application.
SAFETY INFORMATION REQUEST FORM -
PHYSICAL CHARACTERISTICS:
VISCOSITY: 125 k.u.
WEIGHT SOLIDS: 64-66%
VOLUME SOLIDS: 45-47%
DRY TO TOUCH: 1 hour
TACK FREE: 2 hours
TIME TO RECOAT: 6 hours
DRY HARD: 24 hours
FLASH POINT: N/A V.O.C.: 37 grams per liter
WEIGHT PER GALLON: 13 lbs. per gal.
COLOR RANGE: unlimited range of colors
PACKAGING: 1 or 5 gallon containers
PRACTICAL COVERAGE: 250 square feet per gallon.
SURFACE PREPARATION: Clean all surfaces of oil, dirt, grease, corrosion and any existing paint that lacks good adhesion. Temperature must be a minimum of 50 degree F. to apply. Ensure that the surface is clean and free of all grease, oil and contaminates. Where rust is evident treat with TS-5679 Phos-Pro Rust Converting Cleaner. Aluminum: Etch bare aluminum with TS-695 Cleaner-Etcher. Prime aluminum with TS-664 Fiberglass & Aluminum Primer according to label directions. Steel: Apply directly to prepared steel. Cement & Masonry Surfaces: New concrete should be allowed to cure 30 days prior to application. Sand, grind or blast where required. Clean with TS -695 Etching Cleaner allow to dry thoroughly. Wood: For previously painted wood, remove any loose or peeling paint. For glossy surfaces, prepare the surface by applying TS-644 Gloss Set (Liquid Sandpaper) to dull finish prior to application. For New Wood: Ensure that the wood is clean and free of all foreign matter, then simply apply Floor-Grip II to the substrate.
APPLICATION: Stir thoroughly before application. Apply by brush or loop or texture roller at a spreading rate of 250 square feet per gallon. Allow the surface at least 24 hours before walking on.
THINNING: Thinning is not recommended. If absolutely necessary use regular tap water.
CLEAN-UP: Equipment and tools may be cleaned with regular tap water or TS-610 Lacquer Thinner. -
COLOR(S): Unlimited Range of Colors.
PRODUCT TYPE:Pigmented waterborne acrylic latex polymer
DESCRIPTION: Floor-Grip II is an acrylic aggregate added floor coating suitable for direct to steel, masonry, concrete or wooden surfaces. It contains a special combination of aggregates which creates an attractive surface when cured. Withstands rough weather conditions high volume traffic and daily wear and tear.
Intended Use: For use on wood, steel, aluminum, concrete or masonry surfaces: Floors, decks, porches, walkways, ramps, steps, boat decks, bridge-ways and numerous other industrial or marine applications.
TS-4 Urethane Reinforced Alkyd
$27.98 $34.98
- Mono-Epoxy rewrites the book on epoxy itself. A new generation alkyd epoxy-ester resin blend that eliminates the need for mixing multiple components making it easier to use. It can be used in hot and cold climates (-40F – 350F). Has a 10 year guaranty in swimming pools (see it at www.lifeguardpaint.com), which is a testimony to its durability. Its exceptionally high level of performance and ease of application combine to make it a compelling choice. Self-priming on porous materials, use recommended primer on non-porous materials. Grinding or blasting not typically required with the use of TS-695 Etching Cleaner or Muriatic acid. Covers up to 300 square feet per gallon. A minimum of two coats is required.
SAFETY INFORMATION REQUEST FORM PRODUCT DATA SHEET -
- Easy to use no mix formula.
- Commercial industrial quality product.
- Will not lift to hot tires.
- Long term waterproof finish.
- Good chemical resistance.
- Self-priming on concrete and porous tile in two or more coats.
- Resists fading and weathering.
- Resists cracking, peeling and chipping.
- Self levels.
- Low odor.
- Nontoxic finish.
- 20 year guarantee.
-
INTENDED USE: Commercial, industrial, manufacturing and residential interior / exterior. Epoxy floor paint.
SURFACES: Concrete, tile, masonry, fiberglass and metal.
USES: Commercial use, garage floors, basements, retail spaces, kitchens, laundry rooms, patios, porches, docks, ramps, walkways. Meets most concrete floor coatings requirements.
THINNER: TS-101 Leveling Thinner.
APPLICATION: Brush, roll or spray.
TS-695 Etching Cleaner Concentrate
$35.85 $44.82
- Etching Cleaner Concentrate is a cleaner-etcher solution used as a preparation treatment on concrete, tile and masonry. Widely used on floors prior to the application of concrete floor coatings and sealers. Removes unwanted contaminants and neutralizes lime and lime by-products on the surface which may seriously impair the coatings’ ability to form a good bond. It is easier, safer and more effective to use than muriatic acid. Removes lime, rust stains, grease, oil and contaminates. Corrects the pH on concrete and other surfaces promoting adhesion. Concentrate saves money on shipping costs. Mixed pint cleans 50-75 sq. ft., mixed quart cleans 200 square feet, mixed gallon cleans 800 square feet.
SAFETY INFORMATION REQUEST FORM -
- Eliminates the need for grinding or blasting in many applications.
- Neutralize with TSP.
- Fast acting and highly effective.
- Concentrate is cheaper to transport.
- Corrects the pH.
- Improves the bonding power of paint and coating products.
-
INTENDED USE: Use to remove contaminates, stains and grime from floors. An effective pre-paint cleaner-etcher solution.
SURFACES: Ferrous and nonferrous metals, fiberglass, concrete, tile, masonry and synthetic materials.
APPLICATION: Mix 1 part concentrate with 3 part water. Apply to pre-wet surface, agitate with a push broom as needed, allow to stand 20-30 minutes, flush thoroughly with water. Use undiluted to remove heavy contamination or for heavy-duty requirements.
TS-6433 Ever-Last Epoxy - 2 Gallon
$235.00 $293.75
- Ever-Last Epoxy Clear is a two component polyamide epoxy floor coating for heavy-duty applications. A government spec formula that performs according to specification number MIL-C-22750. Use Ever-Last Epoxy wherever there is high volume motorized traffic, corrosive chemicals, spilled fuel, oil or in extreme weather conditions. Offers excellent performance in a wide variety of categories including adhesion, hardness, chemical resistance, resistance to acids, alkalis and where high impacts and abrasions are often present. Will not pick up to hot tires. Grinding or blasting not typically required on concrete with the use of TS-695 Etching Cleaner or Muriatic acid. Covers up to 300 square feet per gallon. Apply two or more coats for best results.
SAFETY INFORMATION REQUEST FORM PRODUCT DATA SHEET APPLICATION INSTRUCTIONS -
- A government spec formula suitable for commercial-industrial or residential use.
- Excellent resistance to corrosive chemicals, spilled fuel, and battery acid.
- Long term waterproof finish.
- High adhesion.
- Excellent hardness.
- Produces an exceptionally durable finish.
- 4-6 hour pot life once mixed.
- 20 year guarantee.
-
INTENDED USE: Commercial, industrial, manufacturing and residential use.
SURFACES: Concrete, tile, masonry, fiberglass, wood and metal.
USES: Concrete floors, walkways, ramps, commercial kitchens, manufacturing areas, industrial areas, food service areas, bathrooms and laundry rooms. Excellent for use as an epoxy garage floor coating product.
THINNER: TS-605 Thinner.
APPLICATION: Apply by roller-coat or spray.
TS-6390 Ever-Last Epoxy Primer
$173.20 $216.50
- Ever-Last Epoxy Primer is a two component polyamide epoxy floor coating primer intended for heavy-duty applications. It is your best choice for use on concrete floors because it will not react negatively with alkalis within the concrete matrix. Use it wherever there is high volume motorized traffic or where corrosive chemicals, spilled fuel, oil or standing water is regularly present. Offers excellent adhesion and hardness with superior chemical resistance. Will not pick up to hot tires. Grinding or blasting not typically required on concrete with the use of TS-695 Etching Cleaner or Muriatic acid. Covers up to 300 square feet per gallon.
SAFETY INFORMATION REQUEST FORM PRODUCT DATA SHEET -
- Improves dry and cure times.
- Improves the viscosity and leveling properties of paint and coating products.
- Enhances the penetration of paint and primer.
- A strong and effective cleaning agent.
-
INTENDED USE: A super-duty epoxy floor primer coating intended for industrial floor coatings applications. Suitable for commercial and residential use.
SURFACES: Concrete, tile, masonry, fiberglass, metal and wood.
USES: Concrete floors, walkways, ramps, commercial kitchens, manufacturing areas, industrial areas, food service areas, bathrooms and laundry rooms. Acceptable for use with all epoxy garage floor coating products.
THINNER: TS-605 Thinner.
APPLICATION: Apply by roller-coat or spray.
TS-630 Pro-Tex (Non-slip Additive)
$18.40 $22.99
-
Pro-Tex is a micronized wax additive for liquid coatings that creates a textured slip resistant finish to any paint or clear coating product. Use it to improve slip resistance or simply to add decorative texture to any finish. Acceptable for use with both oil and water based products. It is acceptable for brush and roller-coat applications and it is sprayable. Color is white.
DIRECTIONS: Pour contents of package into liquid coating product, mix thoroughly, apply evenly. No induction time is required. Recommend using one 8 ounce package per gallon.
SAFETY INFORMATION REQUEST FORM PRODUCT DATA SHEET -
- Adds a slip resistant texture to paint and coating products.
- Weightless in paint so it stays suspended better than heavier aggregate additives resulting in a more even finish.
- Adds a decorative appearance where desired.
-
INTENDED USE: A non-slip additive for floor paint and coating products that produces a slip resistant surface.
SURFACES: Decks, floors, steps, patios, walkways, laundry rooms, kitchens, basements, pool decks, handrails, bathrooms.
APPLICATION INSTRUCTIONS: Pour contents of package into container of paint or coating and stir it in thoroughly.
NOTE: may lower the viscosity which may make thinning necessary.
Waterbase Polyester Urethane Kit - Satin or Matte
$214.50 $268.13
-
Top Secret Coatings has developed revolutionary technology that is used to create environmentally friendly urethane and epoxy coatings. What is so unique about the technology and products is that it is done with water as the solvent. Top Secret Coatings do not use a co-solvent or exempt solvents. These products offer many environmental advantages, including:
- Produced in Total Water
- 100% water-based coating without the use of co-solvents
- Not a “watered-down” solvent coating
- Virtually Odorless
- Does not require special breathing apparatus
- No free monomers above OSHA and other safety thresholds
- Contain No Proposition 65 Chemicals
- Meet all Federal, State, and Local Government Agency VOC Regulations (SCAQMD, CARB, EPA, etc.)
- All products are less than 100 g/l VOCs
- Meet U.S. Building Councils’ LEED Criteria
- California Building Code of Regulations Title 24 Part 11 Compliant
DOWNLOAD MORE INFORMATION
OUR CUSTOMERS' BEFORE AND AFTER PICTURES
THE KEY FEATURES AND BENEFITS OF OUR COATINGS
CONCRETE SOLUTIONS MARKETING FLYER FEATURES, BENEFITS & SUBSTRATES INDUSTRIAL MAINTENANCE PRODUCT DETAILS SAFETY INFORMATION REQUEST FORM -
Waterbase Polyester Urethane High Gloss Kit
$214.50 $268.13
-
Top Secret Coatings has developed revolutionary technology that is used to create environmentally friendly urethane and epoxy coatings. What is so unique about the technology and products is that it is done with water as the solvent. Top Secret Coatings do not use a co-solvent or exempt solvents. These products offer many environmental advantages, including:
- Produced in Total Water
- 100% water-based coating without the use of co-solvents
- Not a “watered-down” solvent coating
- Virtually Odorless
- Does not require special breathing apparatus
- No free monomers above OSHA and other safety thresholds
- Contain No Proposition 65 Chemicals
- Meet all Federal, State, and Local Government Agency VOC Regulations (SCAQMD, CARB, EPA, etc.)
- All products are less than 100 g/l VOCs
- Meet U.S. Building Councils’ LEED Criteria
- California Building Code of Regulations Title 24 Part 11 Compliant
DOWNLOAD MORE INFORMATION
OUR CUSTOMERS' BEFORE AND AFTER PICTURES
THE KEY FEATURES AND BENEFITS OF OUR COATINGS
CONCRETE SOLUTIONS MARKETING FLYER FEATURES, BENEFITS & SUBSTRATES INDUSTRIAL MAINTENANCE PRODUCT DETAILS SAFETY INFORMATION REQUEST FORM -
TS-920 Aquapoxy II CLEAR
$138.56 $173.20
- Aquapoxy II Clear produces a durable epoxy finish without the hassle of mixing two components. Like original Aquapoxy (TS-905) it is low VOC, nontoxic and environmentally friendly - but now easier to use! Adhesion, chemical resistance, hardness, long term durability and are ease of use are all excellent. It is acceptable for use where there is motorized traffic, chemicals, salt, high impacts and abrasions. It will not lift to hot tires. It utilizes breathable resin technology to produce a surface tolerant finish. Grinding or blasting not typically required with the use of TS-695 Etching Cleaner or Muriatic acid. It is self-priming and may be applied over any existing coating. Covers up to 250-300 square feet per gallon. Two coats required. Finish is high gloss.
SAFETY INFORMATION REQUEST FORM a href="https://cdn.shopify.com/s/files/1/1332/7087/files/TS-920-application-instructions.pdf?13354161316894623346%0A" class="action_button" style="font-size: 10pt; color: white; background-color: #00b7f0; padding: 6px;" target="_blank">PRODUCT DATA SHEET -
- Suitable for commercial and residential use.
- Eco-friendly, low VOC, low odor product.
- No-mix formula makes it easy to use.
- Surface tolerant breathable finish.
- Provides good chemical resistance.
- Exceptionally high adhesion.
- Excellent hardness & durability.
- Fast drying.
- Self-leveling finish.
- 20 year guarantee.
-
INTENDED USE: Commercial grade finish coating for concrete and tile floors. Interior / exterior use.
SURFACES: Concrete, masonry, plaster, stucco, porous tile & VCT.
USES: Warehouses, driveways, restaurants, hospitals, laundry rooms, hangars, retail spaces and basements. Approved for food service.
THINNER: Water.
PRIMER: Self-priming in two or more coats.
APPLICATION: Brush, roll or spray.
NOT RECOMMENDED: Commercial or residential floor application with vehicle traffic. Use Aquapoxy TS-905 2-part water-base epoxy.
TS-920 Aquapoxy II
$145.49 $181.86
- Aquapoxy II Clear produces a durable epoxy finish without the hassle of mixing two components. Like original Aquapoxy (TS-905) it is low VOC, nontoxic and environmentally friendly - but now easier to use! Adhesion, chemical resistance, hardness, long term durability and are ease of use are all excellent. It is acceptable for use where there is motorized traffic, chemicals, salt, high impacts and abrasions. It will not lift to hot tires. It utilizes breathable resin technology to produce a surface tolerant finish. Grinding or blasting not typically required with the use of TS-695 Etching Cleaner or Muriatic acid. It is self-priming and may be applied over any existing coating. Covers up to 250-300 square feet per gallon. Two coats required. Finish is high gloss.
SAFETY INFORMATION REQUEST FORM PRODUCT DATA SHEET -
- Suitable for commercial and residential use.
- Eco-friendly, low VOC, low odor product.
- No-mix formula makes it easy to use.
- Surface tolerant breathable finish.
- Provides good chemical resistance.
- Exceptionally high adhesion.
- Excellent hardness & durability.
- Fast drying.
- Self-leveling finish.
- 20 year guarantee.
-
INTENDED USE: Commercial grade finish coating for concrete and tile floors. Interior / exterior use.
SURFACES: Concrete, masonry, plaster, stucco, porous tile & VCT.
USES: Warehouses, driveways, restaurants, hospitals, laundry rooms, hangars, retail spaces and basements. Approved for food service.
THINNER: Water.
PRIMER: Self-priming in two or more coats.
APPLICATION: Brush, roll or spray.
NOT RECOMMENDED: Commercial or residential floor application with vehicle traffic. Use Aquapoxy TS-905 2-part water-base epoxy.
TS-631 Shell-Tex (Non-slip Additive)
$18.40 $22.99
-
Shell-Tex is a finely ground walnut shell additive for liquid coatings that creates a textured slip resistant finish to any paint or clear coating product. Use it to improve slip resistance or simply to add decorative texture to any finish. Acceptable for use with both oil and water based products. It is acceptable for brush and roller-coat applications and it is sprayable.
DIRECTIONS: Pour contents of package into liquid coating product, mix thoroughly, apply evenly. No induction time is required. Color is walnut shell. Recommend using one 16 ounce package per gallon.
SAFETY INFORMATION REQUEST FORM PRODUCT DATA SHEET -
- Adds a slip resistant texture to paint and coating products.
- Stays suspended better than silica aggregates resulting in a more even finish.
- Adds a decorative appearance where desired.
-
INTENDED USE: An additive for urethane and epoxy floor coatings that adds texture and slip resistance.
SURFACES: Decks, floors, steps, patios, walkways, laundry rooms, kitchens, basements, pool decks, handrails, bathrooms.
APPLICATION INSTRUCTIONS: Pour contents of package into container of paint or coating and stir it in thoroughly.
NOTE: May lower the viscosity which may make thinning necessary.
TS-105 CLEAR