Water-based Epoxy Pool Grip is a two component water based epoxy tie-coat/sealer with excellent adhesive properties over existing one and two part finishes. Used on existing finishes which will be over coated with a different technology - chlorinated rubber over epoxy, or epoxy over chlorinated rubber. Applied by roller or brush but can be sprayed if desired.
Polymetric particles are granules for non-skid applications where maximum asperity and traction is the goal. While most other polymer based non-skid additives are based on relatively soft polyethylene waxes, this was selected from a thermoset polymer family that is known for its hardness and toughness. It is an excellent alternative to traditional sand as it does not contain free crystalline silica. It also weighs less than sand so it doesn’t settle as quickly when pre-mixed with paints.