TSC Clear
TS-100 Silicone Epoxy CLEAR
$44.06 $52.45
-
Silicone Epoxy is a unique resin blend that produces extraordinary results in a wide variety of applications. Silicone combined with epoxy produces a finish that is both hard and flexible at the same time. The self leveling finish is remarkably glossy and smooth. Offers unequaled performance where standing water, grease, oil or intense UV are regularly present. Offers a high level of adhesion with good flexibility, hardness, chemical resistance and resistance to high heat. Offers remarkable color and gloss retention. Grinding or blasting not typically required on concrete with the use of TS-695 Etching Cleaner or Muriatic acid. Covers up to 400 square feet per gallon. Apply two or more coats for best results. Note: Product formerly named 1-Part Epoxy.
SAFETY INFORMATION REQUEST FORM PRODUCT DATA SHEET APPLICATION INSTRUCTIONS CONCRETE FLOOR APPLICATION METAL ROOF APPLICATION TUB, SINK, TILE COUNTERTOP APPLICATION -
- Suitable for commercial-industrial or residential use.
- Low VOC low odor product.
- Produces a hard yet flexible finish.
- Provides a high level of chemical resistance.
- Waterproof long-term.
- Provides unequaled UV resistance, colorfastness and gloss retention.
- Withstands heat to 400F.
- Resists cracking, peeling and chipping.
- Self-leveling finish.
- 20 year guarantee.
-
INTENDED USE: Finish coating for floors. Interior / exterior use.
SURFACES: Concrete, tile, masonry, plaster, wood, fiberglass, synthetic materials and all metals.
USES: Showers, kitchens, bathrooms, laundry rooms, basements, epoxy garage floors and most concrete floor paint applications. Approved for food service.
strong>PRIMER: Concrete; self priming in to or moe coats. wood, linoleum & fiberglass TS-664 Etching Primer.
THINNER: TS-101 Thinner.
APPLICATION: Brush, roll or spray.
Silicone Epoxy is a unique resin blend that produces extraordinary results in a wide variety of applications. Silicone combined with epoxy produces a finish that is both hard and flexible at the same time. The self leveling finish is remarkably glossy and smooth. Offers unequaled performance where standing water, grease, oil or intense UV are regularly present. Offers a high level of adhesion with good flexibility, hardness, chemical resistance and resistance to high heat. Offers remarkable color and gloss retention. Grinding or blasting not typically required on concrete with the use of TS-695 Etching Cleaner or Muriatic acid. Covers up to 400 square feet per gallon. Apply two or more coats for best results. Note: Product formerly named 1-Part Epoxy.
TS-105 - Clear Coat & Clear Tint Base / Catalyst Kit
$149.95 $202.00
-
Top Secret Coatings has developed revolutionary technology that is used to create environmentally friendly urethane and epoxy coatings. What is so unique about the technology and products is that it is done with water as the solvent. Top Secret Coatings do not use a co-solvent or exempt solvents. These products offer many environmental advantages, including:
- Produced in Total Water
- 100% water-based coating without the use of co-solvents
- Not a “watered-down” solvent coating
- Virtually Odorless
- Does not require special breathing apparatus
- No free monomers above OSHA and other safety thresholds
- Contain No Proposition 65 Chemicals
- Meet all Federal, State, and Local Government Agency VOC Regulations (SCAQMD, CARB, EPA, etc.)
- All products are less than 100 g/l VOCs
- Meet U.S. Building Councils’ LEED Criteria
- California Building Code of Regulations Title 24 Part 11 Compliant
CONCRETE SOLUTIONS MARKETING FLYER FEATURES, BENEFITS & SUBSTRATES INDUSTRIAL MAINTENANCE PRODUCT DETAILS SAFETY INFORMATION REQUEST FORM -
TS-200 Mono-Epoxy CLEAR
$70.52 $143.80
-
Mono-Epoxy rewrites the book on epoxy itself. A new generation alkyd epoxy-ester resin blend that eliminates the need for mixing multiple components making it easier to use. It can be used in hot and cold climates (-40F – 350F). Has a 10 year guaranty in swimming pools (see it at www.lifeguardpaint.com), which is a testimony to its durability. Its exceptionally high level of performance and ease of application combine to make it a compelling choice. Self-priming on porous materials, use recommended primer on non-porous materials. Grinding or blasting not typically required with the use of TS-695 Etching Cleaner or Muriatic acid. Covers up to 300 square feet per gallon. A minimum of two coats is required.
SAFETY INFORMATION REQUEST FORM PRODUCT DATA SHEET APPLICATION INSTRUCTIONS -
- Easy to use no mix formula.
- Commercial industrial quality product.
- Will not lift to hot tires.
- Long term waterproof finish.
- Good chemical resistance.
- Self-priming on concrete and porous tile in two or more coats.
- Resists fading and weathering.
- Resists cracking, peeling and chipping.
- Self levels.
- Low odor.
- Nontoxic finish.
- 20 year guaranty.
-
INTENDED USE: Commercial, industrial, manufacturing and residential interior / exterior. Epoxy floor paint.
SURFACES: Concrete, tile, masonry, fiberglass and metal.
USES: Commercial use, garage floors, basements, retail spaces, kitchens, laundry rooms, patios, porches, docks, ramps, walkways. Meets most concrete floor coatings requirements.
THINNER: TS-101 Leveling Thinner.
APPLICATION: Brush, roll or spray.
TS-4 Urethane Reinforced Alkyd CLEAR
$31.71 $104.95
-
Mono-Epoxy rewrites the book on epoxy itself. A new generation alkyd epoxy-ester resin blend that eliminates the need for mixing multiple components making it easier to use. It can be used in hot and cold climates (-40F – 350F). Has a 10 year guaranty in swimming pools (see it at www.lifeguardpaint.com), which is a testimony to its durability. Its exceptionally high level of performance and ease of application combine to make it a compelling choice. Self-priming on porous materials, use recommended primer on non-porous materials. Grinding or blasting not typically required with the use of TS-695 Etching Cleaner or Muriatic acid. Covers up to 300 square feet per gallon. A minimum of two coats is required.
SAFETY INFORMATION REQUEST FORM PRODUCT DATA SHEET -
- Easy to use no mix formula.
- Commercial industrial quality product.
- Will not lift to hot tires.
- Long term waterproof finish.
- Good chemical resistance.
- Self-priming on concrete and porous tile in two or more coats.
- Resists fading and weathering.
- Resists cracking, peeling and chipping.
- Self levels.
- Low odor.
- Nontoxic finish.
- 20 year guaranty.
-
INTENDED USE: Commercial, industrial, manufacturing and residential interior / exterior. Epoxy floor paint.
SURFACES: Concrete, tile, masonry, fiberglass and metal.
USES: Commercial use, garage floors, basements, retail spaces, kitchens, laundry rooms, patios, porches, docks, ramps, walkways. Meets most concrete floor coatings requirements.
THINNER: TS-101 Leveling Thinner.
APPLICATION: Brush, roll or spray.
TS-6433 Ever-Last Epoxy CLEAR - 2 Gallon
$213.62 $254.31
-
Ever-Last Epoxy Clear is a two component polyamide epoxy floor coating for heavy-duty applications. A government spec formula that performs according to specification number MIL-C-22750. Use Ever-Last Epoxy wherever there is high volume motorized traffic, corrosive chemicals, spilled fuel, oil or in extreme weather conditions. Offers excellent performance in a wide variety of categories including adhesion, hardness, chemical resistance, resistance to acids, alkalis and where high impacts and abrasions are often present. Will not pick up to hot tires. Grinding or blasting not typically required on concrete with the use of TS-695 Etching Cleaner or Muriatic acid. Covers up to 300 square feet per gallon. Apply two or more coats for best results.
SAFETY INFORMATION REQUEST FORM PRODUCT DATA SHEET APPLICATION INSTRUCTIONS -
- A government spec formula suitable for commercial-industrial or residential use.
- Excellent resistance to corrosive chemicals, spilled fuel, and battery acid.
- Long term waterproof finish.
- High adhesion.
- Excellent hardness.
- Produces an exceptionally durable finish.
- 4-6 hour pot life once mixed.
- 20 year guarantee.
-
INTENDED USE: Commercial, industrial, manufacturing and residential use.
SURFACES: Concrete, tile, masonry, fiberglass, wood and metal.
USES: Concrete floors, walkways, ramps, commercial kitchens, manufacturing areas, industrial areas, food service areas, bathrooms and laundry rooms. Excellent for use as an epoxy garage floor coating product.
THINNER: TS-605 Thinner.
APPLICATION: Apply by roller-coat or spray.
TS-66 Supreme Urethane CLEAR
$66.99 $79.75
-
Supreme Urethane is our most durable product. A super-duty two-component aliphatic acrylic polyurethane finish coating durable enough for the harshest environment and high abuse areas. This recent reformulation of TS-2 Hard-Shell Urethane offers lower VOC, twice the solid content resulting in higher build and increased long-term durability. Offers unequalled performance in a wide variety of categories including adhesion, hardness, chemical resistance, resistance to high heat, flexibity, color and gloss retention. Intended for use where heavy traffic, strong chemicals, high heat, spilled fuel, acids, alkalis, solvents, saltwater, high impacts and corrosion are present. Will not pick up to hot tires. Grinding or blasting not typically required with the use of TS-695 Etching Cleaner or Muriatic acid. Covers up to 300 square feet per gallon.
SAFETY INFORMATION REQUEST FORM PRODUCT DATA SHEET APPLICATION INSTRUCTIONS -
- A recently updated government spec product suitable for commercial-industrial or residential use.
- Features lower VOC and higher solid content for increased build.
- Provides unequaled resistance to traffic and abuse.
- Finish is waterproof long-term.
- Excellent combination of flexibility and hardness.
- Outstanding UV resistance.
- Colorfast gloss retentive.
- Withstands heat to 500F.
- Self leveling finish.
- 4-6 hour pot life once mixed.
-
INTENDED USE: A super-duty finish coating for industrial, manufacturing and residential interior / exterior applications.
SURFACES: Concrete, tile, masonry, plaster, wood, fiberglass, synthetic materials and all metals.
USES: Commercial use, hangars, bathrooms, commercial kitchens, parking garages, drive through areas, concrete sealer and garage floor paint. Approved for food service.
PRIMER: Concrete TS-6390, glazed tile linoleum & fiberglass TS-664, wood, none required.
THINNER: TS-605 Thinner.
APPLICATION: Brush, roll or spray.
TS-905 Aquapoxy Epoxy CLEAR
$194.00 $230.95
-
Aquapoxy is a new generation catalyst-cured epoxy floor finish that produces excellent results without harming you or the environment. And it’s tough! Recently chosen by 7-11 Stores (world’s largest retail chain) for use in all new construction. Utilizes breathable resin technology to produce an exceptionally hard, durable, surface tolerant finish. Adhesion, chemical resistance, hardness and long term durability are all impressive! This unique combination of environmental and performance properties make it a favorite with architects and property managers. Acceptable for use where heavy traffic, corrosive chemicals, impacts and abrasions are present. Grinding or blasting not typically required with the use of TS-695 Etching Cleaner or Muriatic acid. Covers 200-250 square feet per gallon. Apply one or two coats as desired. Two coats recommended in H-D and commercial applications.
SAFETY INFORMATION REQUEST FORM PRODUCT DATA SHEET APPLICATION INSTRUCTIONS -
- Use as a one-coat or two-coat system.
- Eco-friendly Zero VOC product.
- Long pot life makes it easy to use.
- Surface tolerant breathable formula.
- Provides remarkable resistance to corrosive chemicals.
- High adhesion.
- Excellent hardness.
- Good colorfastness and gloss retention.
- Self-leveling finish.
- 20 year guarantee.
-
INTENDED USE: A super-duty concrete coating for floors. Primarily for interior use but may be used outdoors.
SURFACES: Concrete, tile, VCT, masonry, plaster, fiberglass, synthetic materials.
USES: Commercial industrial use, hangars, commercial kitchens, retail, bathrooms, parking garages, concrete sealer and garage floor coatings. Approved for food service.
PRIMER: None required on concrete and tile. Glazed tile, linoleum & fiberglass use TS-664.
THINNER: Water.
APPLICATION: Roll or spray.
NOT RECOMMENDED: For wooden surfaces.
TS-920 Aquapoxy II CLEAR
$125.96 $157.45
-
Aquapoxy II Clear produces a durable epoxy finish without the hassle of mixing two components. Like original Aquapoxy (TS-905) it is low VOC, nontoxic and environmentally friendly - but now easier to use! Adhesion, chemical resistance, hardness, long term durability and are ease of use are all excellent. It is acceptable for use where there is motorized traffic, chemicals, salt, high impacts and abrasions. It will not lift to hot tires. It utilizes breathable resin technology to produce a surface tolerant finish. Grinding or blasting not typically required with the use of TS-695 Etching Cleaner or Muriatic acid. It is self-priming and may be applied over any existing coating. Covers up to 250-300 square feet per gallon. Two coats required. Finish is high gloss.
SAFETY INFORMATION REQUEST FORM a href="https://cdn.shopify.com/s/files/1/1332/7087/files/TS-920-application-instructions.pdf?13354161316894623346%0A" class="action_button" style="font-size: 10pt; color: white; background-color: #00b7f0; padding: 6px;" target="_blank">PRODUCT DATA SHEET -
- Suitable for commercial and residential use.
- Eco-friendly, low VOC, low odor product.
- No-mix formula makes it easy to use.
- Surface tolerant breathable finish.
- Provides good chemical resistance.
- Exceptionally high adhesion.
- Excellent hardness & durability.
- Fast drying.
- Self-leveling finish.
- 20 year guarantee.
-
INTENDED USE: Commercial grade finish coating for concrete and tile floors. Interior / exterior use.
SURFACES: Concrete, masonry, plaster, stucco, porous tile & VCT.
USES: Warehouses, driveways, restaurants, hospitals, laundry rooms, hangars, retail spaces and basements. Approved for food service.
THINNER: Water.
PRIMER: Self-priming in two or more coats.
APPLICATION: Brush, roll or spray.
NOT RECOMMENDED: Commercial or residential floor application with vehicle traffic. Use Aquapoxy TS-905 2-part water-base epoxy.
The best warranty in the business!