TSC Primers
TS-6390 Ever-Last Epoxy Primer
$173.20 $216.50
- Ever-Last Epoxy Primer is a two component polyamide epoxy floor coating primer intended for heavy-duty applications. It is your best choice for use on concrete floors because it will not react negatively with alkalis within the concrete matrix. Use it wherever there is high volume motorized traffic or where corrosive chemicals, spilled fuel, oil or standing water is regularly present. Offers excellent adhesion and hardness with superior chemical resistance. Will not pick up to hot tires. Grinding or blasting not typically required on concrete with the use of TS-695 Etching Cleaner or Muriatic acid. Covers up to 300 square feet per gallon.
SAFETY INFORMATION REQUEST FORM PRODUCT DATA SHEET -
- Improves dry and cure times.
- Improves the viscosity and leveling properties of paint and coating products.
- Enhances the penetration of paint and primer.
- A strong and effective cleaning agent.
-
INTENDED USE: A super-duty epoxy floor primer coating intended for industrial floor coatings applications. Suitable for commercial and residential use.
SURFACES: Concrete, tile, masonry, fiberglass, metal and wood.
USES: Concrete floors, walkways, ramps, commercial kitchens, manufacturing areas, industrial areas, food service areas, bathrooms and laundry rooms. Acceptable for use with all epoxy garage floor coating products.
THINNER: TS-605 Thinner.
APPLICATION: Apply by roller-coat or spray.
TS-664 Etching Primer
$38.77 $48.46
-
Etching Primer is a phenolic modified alkyd primer coating that produces a sound base coat for all floor paint and coating products. An exceptionally high quality product that conforms to government specification number TT-P-664 C, D. Fast drying; it is dry enough to be over-coated in just two hours! Choose it for its speed, ease of application, tenacious (acid etching) bond and long term durability if provides. Adheres to virtually any surface. Guaranteed to be lacquer proof (won’t lift due to compatibility issues). One gallon covers up to 300 square feet. See Product Data Sheet for further details.
NOTE: This primer is porous, intended to draw the top coat into it creating an unbreakable bond. Care should be taken to be sure it does not draw in unwanted moisture at time of application.
SAFETY INFORMATION REQUEST FORM PRODUCT DATA SHEET -
- Use it on most any surface.
- Produces an exceptionally tenacious etching bond.
- Fast drying.
- Recoatable in only two hours.
- Sandable in two hours.
- High build.
- Will fill and seal small cracks and voids.
- Withstands heat to 350F.
- Resists cracking, peeling and chipping.
-
INTENDED USE: A high adhesion primer coating for floor coating products. Intended for use on hard to adhere to surfaces. Industrial commercial and residential use.
SURFACES: Concrete, glazed tile, VCT tile, linoleum, masonry, metal, synthetic materials and wood.
USES: Hard to adhere to surfaces. Commercial and industrial areas, kitchens, food service areas, bathrooms and laundry rooms.
THINNER: TS-605 Thinner.
APPLICATION: Most applications are by roller coat but it is sprayable.
TS-780 Mono-Epoxy Primer
$64.96 $81.20
- Mono-Epoxy Primer makes priming with epoxy easier than ever with its unique no-mix formula. A new generation epoxy-ester primer that utilizes oxygen curing rather than two-component catalyst-curing making it easier to use. Its exceptionally high level of performance and ease of application combine to make it a compelling choice. Provides a sound base for the application of most any floor paint or coating product. Grinding or blasting not typically required on concrete with the use of TS-695 Etching Cleaner or Muriatic acid. Covers up to 300 square feet per gallon. See Product Data Sheet for further details.
SAFETY INFORMATION REQUEST FORM -
- Easy to use no mix formula.
- Commercial industrial quality product.
- Will not lift to hot tires.
- Will fill and seal small cracks and voids.
- Good chemical resistance.
- Withstands harsh weather climates.
- A barrier coat that prevents water intrusion.
- Resists cracking, peeling and chipping.
- Low odor.
-
INTENDED USE: An easy to use no-mix epoxy floor coating primer acceptable for a wide variety of applications.
SURFACES: Concrete, tile, masonry and wood.
USES: Commercial kitchens, manufacturing and industrial areas, retail spaces, food service areas, bathrooms and laundry rooms. Excellent for use with epoxy garage floor coatings.
THINNER: TS-101 Thinner.
APPLICATION: Most applications are by roller coat but it is sprayable.
TS-910 Aquapoxy Primer
$174.46 $218.24
- Aquapoxy Primer is a two-component catalyst-cured epoxy primer that is safe and easy to use. The Aquapoxy finish coating is self-priming so Aquapoxy Primer is typically used to achieve a sound base coat, higher build with increased long term durability in mind. It shares the same surface tolerant breathable resins as the Aquapoxy finish coating with zero VOC and low odor. Adhesion, chemical resistance, hardness and long term durability are all excellent. Grinding or blasting not typically required on concrete with the use of TS-695 Etching Cleaner or Muriatic acid. Covers up to 200-250 square feet per gallon.
SAFETY INFORMATION REQUEST FORM PRODUCT DATA SHEET -
- Eco-friendly Zero VOC odorless product.
- Provides a sound base coat with good build.
- Long pot life makes it easy to use.
- Surface tolerant breathable formula.
- Excellent chemical resistance.
- High adhesion.
- Excellent hardness.
- Resists cracking, peeling and chipping.
- Self-leveling.
- Tint-able in any color desired.
-
INTENDED USE: A two-component polyamine epoxy floor primer coating acceptable for heavy-duty commercial, industrial, and consumer use.
SURFACES: Concrete, tile, masonry and plaster.
USES: Manufacturing, industrial, commercial, retail, hospitals, food service, laundry rooms, hangars, basements and garage floor paint.
APPLICATION: Roll or spray.
NOT RECOMMENDED: For wooden surfaces.